PRICING and ORDER ENTRY below
Looking for a premier street pole banner mounting system that prevents banner tears, destruction, and costly replacement? Ban45 is a custom pole banner hardware system designed to deflect strong winds and preserve street banners. Ban45 can be mounted on light posts and street lamp poles. This patent pending product is truly a banner saver!
We cut the high strength fiberglass poles to fit the exact size banner you wish to install. You can use Ban45 with any size and length of banner, but we suggest a banner width of 48 inch max. White UV resistant ball finials are included at no charge, permanently attached to the end of the pole. This offers an attractive, finished look to your pole banner display, and will help retain your banner on the poles along with the zip ties. We can also leave off the ball finials if you wish. The pole inserts into the base of the unit 3 inches.
- 2 Integrated Spring Base units each with pre-installed tethered SS pole pin
- We include 1 set (2 straps) of hook & loop fixing straps for every 6 sets ordered. You can order extras.
- Custom, cut to length fiberglass poles, ¾” diameter, with attached ball finial and cross drilled hole for pole pin. (for photo purposes, poles are shown short) Or, we may use solid white painted aluminum poles for banners 24” or less in width.
- Can be mounted to pole with 6 high strength hose clamps per set, 2 on the outers, 1 for the inners, for best strength. Or, use permanent banding system (from us or use your own). If you're using hose clamps, we suggest only using our clamps as other hose clamps are not as strong. 6 hose clamps supplied per set. Can also be mounted to a brick masonry or concrete wall using 3/8 bolts, please inquire. Banding shown in picture is a separate purchase, depending on your needs. Banding is NOT included in the “Kit” pricing. Extra parts can be ordered below.
- 6 black, UV rated, high strength zip ties to secure your banner to Base unit (4 extras)
